[Equest-users] A question about flow control

[Vikram Sami]

I have a question about the minimum flow control at the zone level. If
you use the DCV reset up/down, the eQUEST documentation says this: 

Each zone OA requirement is calculated based upon the hourly maximum of
either OA-CFM/PER (times the NUMBER-OF-PEOPLE adjusted by the hourly
PEOPLE-SCHEDULE) or a minimum OA ventilation rate. The zone minimum OA
ventilation rate is either MIN-OUTSIDE-AIR if specified or the maximum
of OA-CHANGES (times the zone VOLUME/60), OA-FLOW/AREA (times the zone
AREA.)

If you have an exhaust cfm specified for the room with an exhaust
schedule, Does it override the  minimum OA requirement? 
Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 
LORD, AECK & SARGENT ARCHITECTURE
1201 Peachtree Street NE, Suite 300, Atlanta, GA 30361 
Responsive Design * Technological Expertise * Exceptional Service 
Please visit our new website | www.lordaecksargent.com
<file:///\\www.lordaecksargent.com\> 
P Think GREEN before you print.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090224/631d1d72/attachment.htm>