[Equest-users] DHW Tank Jacket
John Aulbach
jra_sac at yahoo.com
Tue Feb 10 10:52:23 PST 2009
Niko:
eQuest seems to have tank volume and tank R-value. I beileve you could create a tank geometry to establish surface are, then apply your base and your proposed R-values to develop savings for added insulation.
--- On Tue, 2/10/09, Niko Michael Kalinic <kalinic at colorado.edu> wrote:
From: Niko Michael Kalinic <kalinic at colorado.edu>
Subject: [Equest-users] DHW Tank Jacket
To: equest-users at lists.onebuilding.org
Date: Tuesday, February 10, 2009, 8:49 AM
Has anyone modeled the addition of a DHW tank insulation jacket? Is there a simple way to adjust the UA value for the tank by a certain factor representative of the inuslation jacket R-value without knowing the original R-value of the tank or the area? I am having trouble figuring out what area eQUEST uses in the UA calculation.
Thank You,
Niko
--
Niko Michael Kalinic
University of Colorado
Building Systems Program
kalinic at colorado.edu
cell: (303)887-5685
-----Inline Attachment Follows-----
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090210/42f0e740/attachment-0002.htm>
More information about the Equest-users
mailing list