[Equest-users] adjoining spaces in different shells
Cramer Silkworth
silkworth at transsolar.com
Mon Jan 12 08:10:15 PST 2009
Hey All,
Quick (I think) question about walls. Due to the crazy shape of my
building, I built it using multiple shells in the DD Wizard - often
using two shells for the same floor, splitting the floor where the roof
and/or floor conditions above and below that particular floor change. So
now I've got walls where these two shells meet, and of course there's
not actually a wall there. Is it safe to simply delete these walls from
the component tree, or do I need to keep them? Along that same line, is
it possible to specify the boundary conditions (whether it's ambient
conditions on the other side, or some other zone, etc) wall-by-wall, or
is that set at the 'space' level in the tree?
Thanks,
Cramer
J. Cramer Silkworth
Transsolar Climate Engineering
Technical consulting for energy efficiency and environmental quality in
buildings.
145 Hudson Street
Suite 402
New York, NY 10013
Office: 212-219-2255
Mobile: 347-283-2547
silkworth at transsolar.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090112/98832e40/attachment.htm>
More information about the Equest-users
mailing list