[Equest-users] How to change equipment EER in parametric runs?

[Karen Walkerman]

That would be "COOLING-EIR"

The EIR is the electric input ratio, which is the inverse of the COP.

--
Karen

On Wed, Jul 1, 2009 at 10:16 AM, Dale Lagon <dlagon at nrg-concepts.com> wrote:

>  Hi everyone,
>
>
>
> I’m trying to lower the EER my data center cooling unit to show the
> potential savings from the proposed design.  I’m doing this parametrically
> but I have no idea which bdl command to use in the parametric run
> interface.  Any help is appreciated.
>
>
>
> Sincerely,
>
>
>
> *Dale K. Lagon*
>
> Energy Concepts
>
> 3445 Winton Place, Suite 102
>
> Rochester, NY 14623
>
>
>
> Phone:  585-272-4650
>
> Cell:  585-355-6555
>
> Fax:  585-272-4676
>
> E-mail:  dlagon at nrg-concepts.com
>
> Web:  http://www.nrg-concepts.com/
>
>
>
> The contents of this transmittal are intended solely for the individual or
> entity to which it is addressed.  All views and opinions contained therein
> are those of the author and do not necessarily reflect those of Energy
> Concepts.  Energy Concepts accepts no liability for damages caused by any
> virus transmitted by this e-mail.  If you have received this message in
> error, please notify the system manager.
>
>
>
>  *Please be mindful of the environment when printing this email.*
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090701/bd6ee62d/attachment-0002.htm>