[Equest-users] HP Supplemental Heat

Gary.Schrader at tac.com Gary.Schrader at tac.com
Mon Jul 6 13:54:47 PDT 2009

Can you attach your .pd2 and .inp files? I'd like to see what's going on
first hand...

Gary Schrader 
Engineer I

16011 College Boulevard, Suite 212
Lenexa, KS  66219





+1 913-469-0206


+1 913-217-8068


Gary.Schrader at tac.com


www.tac.com <http://www.tac.com/> 

TAC is becoming Schneider Electric on October 1, 2009

Notice: This email message, together with any attachments, contains
information of TAC, which may be confidential, proprietary, copyrighted
and/or legally privileged. This email is intended solely for the use of
the individual or entity named on the message. If you are not the
intended recipient, and have received this message in error, please
immediately return by email and then delete it.



From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of
Drake.Wahlers at tac.com
Sent: Monday, July 06, 2009 3:47 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] HP Supplemental Heat

I'm trying to model Single Zone Heat Pumps with a HW Loop as the
supplemental heat source. But when I run the simulation, I have an error
saying that the HW Loop has "zero design flow"
Has anyone experienced this problem? Any help would be appreciated.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090706/b655949e/attachment-0002.htm>

More information about the Equest-users mailing list