[Equest-users] Variable Volume AHU with Chilled Water

[Vikram Sami]

Why wouldn't you be able to do this with the standard VAV (not the
packaged VAV) option in eQUEST?

 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE



 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Grando,
John
Sent: Thursday, July 16, 2009 3:59 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Variable Volume AHU with Chilled Water

 

Hello All,

 

Is there any way to model a unit that will Vary it's main supply air
volume using chilled water.  Basically I need a system that behaves like
a PVVT, but with chilled water coils for cooling.  Thank you.

 

 

John Grando LEED AP

 

 

 


NOTICE OF CONFIDENTIALITY This E-mail message and its attachments (if
any) are intended solely for the use of the addressees hereof. In
addition, this message and the attachments (if any) may contain
information that is confidential, privileged and exempt from disclosure
under applicable law. If you are not the intended recipient of this
message, you are prohibited from reading, disclosing, reproducing,
distributing, disseminating or otherwise using this transmission.
Delivery of this message to any person other than the intended recipient
is not intended to waive any right or privilege. If you have received
this message in error, please promptly notify the sender by reply E-mail
and immediately delete this message from your system. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090716/956ffc43/attachment-0002.htm>