[Equest-users] Building rotations

[Grando, John]

Hello,

I have a question regarding modeling for LEED.  I am working on a building in New York City and it is surrounded by much higher buildings.  Are we allowed to model the surrounding buildings in the baseline and design?  If so, when I rotate it, do I keep readjusting it so that it doesn't intersect with the fixed shades?

It seems like the other buildings should be taken into account considering that this building is around 80% glass but does not receive a large amount of sunlight.


John Grando LEED AP| Mechanical Engineer
Phone: 212-615-3705 | Fax: 212-615-3700
jgrando at cosentini.com

Cosentini Associates - A Tetra Tech Company
Two Pennsylvania Plaza - Third Floor - New York, NY 10121
www.cosentini.com<http://www.cosentini.com/>







NOTICE OF CONFIDENTIALITY

This E-mail message and its attachments (if any) are intended solely for the use of the addressees hereof.  In addition, this message and the attachments (if any) may contain information that is confidential, privileged and exempt from disclosure under applicable law.  If you are not the intended recipient of this message, you are prohibited from reading, disclosing, reproducing, distributing, disseminating or otherwise using this transmission.  Delivery of this message to any person other than the intended recipient is not intended to waive any right or privilege.  If you have received this message in error, please promptly notify the sender by reply E-mail and immediately delete this message from your system.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090619/987a3361/attachment.htm>