[Equest-users] Parametric runs

[John Forester]

John,

 

The parametric run information is stored in the PRD file and can be opened
with any text editor.

 

John T. Forester, LEED AP
Demand Management Institute
35 Walnut Street
Wellesley, MA 02481
Phone: 781 431 1100 x14
Fax: 781 431 1109
email:  <mailto:jforester at dmiinc.comweb> jforester at dmiinc.com
web:  <http://www.dmiinc.com/> www.dmiinc.com

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Grando,
John
Sent: Tuesday, June 23, 2009 8:14 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Parametric runs

 

Hello,

 

Does anyone know which file the information for a parametric run is stored
in?

 

 

John Grando LEED AP

 

 

 


NOTICE OF CONFIDENTIALITY This E-mail message and its attachments (if any)
are intended solely for the use of the addressees hereof. In addition, this
message and the attachments (if any) may contain information that is
confidential, privileged and exempt from disclosure under applicable law. If
you are not the intended recipient of this message, you are prohibited from
reading, disclosing, reproducing, distributing, disseminating or otherwise
using this transmission. Delivery of this message to any person other than
the intended recipient is not intended to waive any right or privilege. If
you have received this message in error, please promptly notify the sender
by reply E-mail and immediately delete this message from your system. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090623/8d9a31e3/attachment-0002.htm>