[Equest-users] High hours outside throttling range
Lam, Linda
linda.lam at wspfk.com
Wed Mar 4 11:17:04 PST 2009
To All,
I've got a high number of hours outside throttling range for a 27-story building in India (40% of hours). It is a VAV with electric reheat. Upon inputting 40,000 cfm per floor (25,000 sf), I get down to about 3% of hours outside throttling range. However, Trace only calls for about 20,000 cfm per floor. I double checked all my load inputs across both programs and it seems like occupancy, lights and equipment loads match up.
I noticed that most of my unmet cooling load hours occur in my internal zones. So I input a system total supply volume of 25,000 cfm per floor and also allocated 16,000 cfm to the internal zones. This decreased the number of hours outside throttling range to about 4%.
My question is, am I allowed to "allocate" cfm to the internal zones like that?
Thanks very much in advance!
Linda
Linda Lam, LEED® AP
WSP Flack + Kurtz
405 Howard Street, Suite 500
San Francisco, CA 94105
Direct: 415.402.5813
Main Tel: 415.398.3833
Fax: 415.433.5311
website: http://www.wspfk.com
vCard: http://vcards.wspfk.com/vcardloader.php?filename=flackkurtz-linda-lam-wspfk-com-1227040073.vcf
image: <http://vcards.wspfk.com/usercard.php?filename=flackkurtz-linda-lam-wspfk-com-1227040073.png>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090304/d0672c70/attachment.htm>
More information about the Equest-users
mailing list