[Equest-users] Floor-Ceiling vs Floor-Floor Error

[Arslan Djumaev]

Hello All,

I have solved the roof pitch problem I had earlier just by making both wide ends hip ends and eQuest fixed itself. However, I am now modeling a garage abutting the house which has a sloped roof. I specified that the garage is 1 storey and enter 5.083 ft for the floor to floor height and 5.083 for the floor to ceiling height. This is my roof level. Every time I try to progress I get this error message:

"ERROR:  Value being checked = 5.083.  Floor-to-Floor Height must be >= Floor-to-Ceiling Height

ERROR:  Value being checked = 5.083.  Floor-to-Ceiling Height must be <= Floor-to-Floor Height"

I don't understand why I am getting it as they are equal, even eQuests help window specifies that if it is a 1 storey building then floor to floor and floor to ceiling heights should both equal the roof level. Even if I change the floor to ceiling height to be say 5, I get the error again.

Thanks in Advance,

Arslan