[Equest-users] Number of heating hours not met

[David Dowling]

I have a question concerning a warning related to the number of heating
hours not met and apologize in advance if this topic has been covered
before.  The warning I am getting is:

 

"Zone might have insufficient heating capability.  Check that the system
or zone HEATING-CAPACITY plus this zones BASEBOARD-RATING is adequate to
maintain the zone specified DESIGN-HEAT-T for the calculated peek zone
load (see LS-A or LS-B for the zone peak load)."

 

I am using the auto sizing function within eQuest so I am not
understanding why the spaces are not satisfied.  Dose anyone know how to
make the auto size function work to satisfy each zone?

 

 

David Dowling

Mechanical Designer

WEST PLAINS ENGINEERING, INC.

1750 Rand Road

Rapid City, SD  57702

Phone: (605) 348-7455  Fax: (605) 348-9445

david.dowling at westplainsengineering.com

www.westplainsengineering.com <http://www.westplainsengineering.com/> 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090512/261a332f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4427 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20090512/261a332f/attachment.jpeg>