[Equest-users] Chiller sequencing

[B. Fountain]

At present, unfortunately, there is no way to model chillers in series in
DOE-2.2/eQUEST.

> I am trying to model a system that uses one (1) 200-ton water cooled
> screw chiller which is in series with two (2) 450-ton centrifugal
> chillers, both of which are in parallel.  Currently eQUEST seems to be
> modeling this as three chillers in parallel.  Is there a way to change
> this in the detail design, and if so, how?  I would greatly appreciate
> help with this.
>
>
>
> Thanks,
>
>
>
> Roger
>
>
>
> Roger Larson  PE, LEED AP
>
> Sr. Project Manager
>
>
>
> ESA Energy Systems Associates, Inc.
>
> 10801 Hammerly Blvd.  Suite 250
>
> Houston, TX  77043
>
>
>
> 281-888-3202  Office
>
> 832-660-4001  Cell
>
> rlarson at esa-engineers.com
>
>
>
> ESA is a Professional MEP Design and Energy Consulting Firm
>
> Take a tour at www.esa-engineers.com <http://www.esa-engineers.com/>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>