[Equest-users] equipment control

[Angel pastor]

Dear all:

We´re currently working with DOE 2.2 v 4.2, and we find that when we try to define a chiller control sequence, when we simulate, none of the two 
available chillers is working.

We copy here the *.inp paragraphs corresponding to cool loop and control 
definition, just in case somebody can give us a clue about it.


$ 
------------------------------ 
---------------------------
$              
Circulation Loops
$ 
---------------------------------------------------------
"Circuito AGUA FRIA" = CIRCULATION-LOOP
   
TYPE             = CHW
   COOL-EQUIP-CTRL  = 
"CONTROL"


$ 
---------------------------------------------------------
$              
Equipment Controls
$ 
---------------------------------------------------------

   
"CONTROL"        = EQUIP-CTRL      
   TYPE             = COOLING
   
CIRCULATION-LOOP = "Circuito AGUA FRIA"
   
CHILLERS-1       = ( "p1","p2" )
   CHILLERS-SEQ-1   
= ( 1   ,   2 )
   ..

In addition, a warning 
appers: "equip-ctrl: control has a storage sequence 
number specified, but no storage device is attached". But we have not defined 
any storage device or storage sequence.

We attach to this mail the 
corresponding *.inp file.

Thank you very much 
in advance.  


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091119/b3ceb502/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: case.INP
Type: application/octet-stream
Size: 22420 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091119/b3ceb502/attachment.obj>