[Equest-users] screen capture/ toolbar

[Umesh Atre]

Just toggle between the main tabs, for example click on the 'Internal
Loads' or 'Air-Side HVAC', and when you come back to the 3D screen,
the toolbar should be back. This has worked for me, though there might
actually be a tool somehere also.
Sometimes your entire 3D model might disappear, and the solution would
be the same as above.
Shutting down the program and restarting also works. No need to
reinstall though.
 
Screen captures are usually done using the PrintScreen command on your
keyboard.
 
 
 
 

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of
jeff at sharpenotes.com
Sent: Thursday, November 19, 2009 12:17 PM
To: eQuest Forum
Subject: [Equest-users] screen capture/ toolbar


Greetings all,

I x'd out (closed) the small toolbar that floats within the 3-d view
screen, and am not able to get it back. 
Is there an easier way than reinstalling the whole program?
 
Also, I appreciate the screen captures you all share in this forum, how
do you get those?
 
Thanks in advance!
J# 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091119/f0e2bc74/attachment-0001.htm>