[Equest-users] No cooling load or heating load

[Thomas Vu]

I am new to eQuest and want to utilize it for my thesis research.  I have a
created a model of an office building in detailed edit mode, but when I run
the simulation there is no apparent cooling or heating loads.  The report
shows no energy and no loads.  I have combed through my model and can't
figure it out.  I've attached the .pd2 and .inp files.

 

 

Thomas Vu, E.I.

Graduate Student

Dept. of Mechanical and Aerospace Engineering

University of Florida

vietdrum at ufl.edu

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091028/8efc021b/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project 2.pd2
Type: application/octet-stream
Size: 2227 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091028/8efc021b/attachment.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Project 2.inp
Type: application/octet-stream
Size: 59330 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091028/8efc021b/attachment-0001.obj>