[Equest-users] Ground-loop HX Error

[Zareh, Hassan]

Colleen,

eQuest doesn't auto size the GSHX. You should define the specification
of the borefield.

 

Hassan

 

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Colleen
Nelson
Sent: Wednesday, October 07, 2009 3:16 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Ground-loop HX Error

 

I receive the following error message when attempting to run simulation:

 

                Ground-loop HX:  GLHX (VertWell-CM) is undersized for
the load and is producing an extreme temperature of -31F.

 

I allowed eQUEST to auto-size the GSHP equipment.

 

Any help is appreciated.

 

 

Colleen Nelson, LEED-AP

Mechanical Engineering

Michaud Cooley Erickson

612.673.6995

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091007/e8912435/attachment-0001.htm>