[Equest-users] Metric project.

[John Aulbach]

Unfortunately, the metric option has not yet been activated in eQuest. DOE-2.1E CAN, however, do such a calculation.
 
We all look forward to this future addition.
 
John R. Aulbach, PE, CEM
Senior Energy Engineer



Partner Energy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com | jaulbach at ptrenergy.com

--- On Thu, 10/8/09, John Howe <JHowe at jbace.com> wrote:


From: John Howe <JHowe at jbace.com>
Subject: [Equest-users] Metric project.
To: equest-users at lists.onebuilding.org
Date: Thursday, October 8, 2009, 10:25 AM








 
I have a job that is designed entirely in metric, including the CAD files. Can I do the entire model in metric?
 
 
John Howe, P.E., LEED AP
Project Engineer
jba consulting engineers
JBA Denver · 13772 Denver West Pkwy, Suite 200 · Lakewood, CO 80401
p 303.985.3260 · f 303.987.2304  · jhowe at jbace.com
 
-----Inline Attachment Follows-----


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20091008/6cb2d1fc/attachment-0002.htm>