[Equest-users] Simple question - I hope...

[Pasha Korber-Gonzalez]

go to the "tools" menu at the top of the screen and then drop down to "view
simulation output"  , next-open the baseline file and you will see a new
screen with a drop down menu at the top left.  Once you see the drop down
menu you can find reports SS-F and SS-R, these will tell you detail about
which rooms/zones & which months loads are not being met.  The value
reported on the BEPS report will tell you the percentage of hours your
conditions/loads are not being met.

Pasha

On Thu, Apr 8, 2010 at 12:06 PM, Terry Budd <terry at leesgood.com> wrote:

>  Where do I find the unmet hours in a report. I may be missing something,
> but I'm not finding it.
>
>
>
> Thanks,
>
> -Terry
>
>
>
> *Terrence W. Budd, P.E., CPD, LEED AP*
>
> * *
>
> Lee S. Good Engineering
>
> 10483 Cleveland Ave NW
>
> Uniontown, Ohio 44685
>
> Phone: 330.494.1574  Fax:330.494.1567
>
> ü Please consider the environment before printing this e-mail.
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100408/dc02ce83/attachment-0001.htm>