[Equest-users] eQUEST - Glass Wall

[John Aulbach]

Sure:

Just make your wall the consistancy of the structural members and make the windows 99% of the wall.

However, I suspect the wall is technically curtainwall. Therefore, make the wall of the curtain wall consistancy and then add the window % as part of the WWR.



John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com
 
 



________________________________
From: "Anand.Varahala at us.schneider-electric.com" <Anand.Varahala at us.schneider-electric.com>
To: equest-users at lists.onebuilding.org
Sent: Thu, April 15, 2010 8:39:00 AM
Subject: [Equest-users] eQUEST - Glass Wall


Good Morning All, 

I am working on modeling a Hotel building with almost all windows on three sides. The only wall would probably be the Columns and Window Frames. 

Can anyone suggest me the best way to model this? I do have all the architectural drawings and details. Any advice on this will be greatly appreciated. 

Thanks a lot in advance! Have a nice day.
_____________________________________________________________________________________

Anand Varahala, LEED® AP  |  Schneider Electric   |  Energy Solutions  |   Application Engineer 
Phone: +1 (919) 227-3920 |   Fax: +1 (859) 962-4561 |   Mobile: +1 (919) 720-0769
Email: Anand.Varahala at us.schneider-electric.com |   Site: www.schneider-electric.us |   Address: 4917 Waters Edge Dr, Suite 270, Raleigh NC 27606USA
PPlease consider the environment before printing this e-mail


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100415/b49e6137/attachment-0002.htm>