[Equest-users] Equest Error - Please Help

[Jackson, Alan]

All

 

Sorry, I have to bring this thread back up. I am experiencing this
issue, also on a 64-bit machine. This is a brand new install and with a
default SD wizard building I am getting the error on clicking finish
button.

 

Build is 3.63 6510

 

I am going to try to go to an older build and see what happens, but if
anyone has any information please let me know.

 

Alan Jackson, LEED AP
KlingStubbins

 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Carol
Gardner
Sent: Monday, April 05, 2010 10:07 AM
To: Wilson, Luke
Cc: Thomas Serra; equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] Equest Error - Please Help

 

If you want to send a zipped file including your .pd2 and .inp, I will
take a look at it.

Carol

On Mon, Apr 5, 2010 at 5:02 AM, Wilson, Luke
<LWilson at integral-group.net> wrote:

Thanks to everyone for replying! I have looked at the bdl file (no
errors), I have also uninstalled and reinstalled (no difference). I am
running equest on a 64bit machine, so maybe that is the problem. Is
anyone running equest on a 64bit machine successfully?

Luke

 

From: Thomas Serra [mailto:tserra at emoenergy.com] 
Sent: Friday, April 02, 2010 11:22 AM
To: Wilson, Luke; equest-users at lists.onebuilding.org
Subject: RE: [Equest-users] Equest Error - Please Help

 

If this is a new installation I would suggest downloading the software
again and reinstalling.

 

Thomas Serra

Project Manager

EMO Energy Solutions, LLC

3141 Fairview Park Drive, Suite 450

Falls Church, VA 22042

voice 703-205-0445 ex-113

fax 703-205-0449

 

From: Wilson, Luke [mailto:LWilson at integral-group.net] 
Sent: Thursday, April 01, 2010 4:20 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Equest Error - Please Help

 

Equesters,

 

I am having a lot of trouble with Equest crashing. When I exit the
wizards after reentering them or when I try to run a parametric
simulation I keep getting the "An invalid argument was encountered"
warning and then it crashes. I tried creating a simple test model and it
was having the same issues. 

 

Apologies for reposting, but I am getting really frustrated with my
models.


If anyone could give me any guidance I would really appreciate it.

 

* Please note our new contact information and operating entity *

 

Luke Wilson, EIT, LEED AP BD+C

 

 

3005 Carrington Mill Blvd., Suite 550, Morrisville, NC 27560

t: 919.597.7931    f: 919.433.5301    e: lwilson at integral-group.net
<mailto:lwilson at integral-group.net>     www.integral-group.net
<http://www.integral-group.net/> 

 

Integral Group.  Deep green engineering.

 

This email and any files transmitted with it are confidential and
intended solely for the addressee.  If you are not the named addressee
you should not disseminate, distribute, copy, or alter this email.

 

Please consider the environment before printing this email.

 


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100430/70ec94df/attachment-0002.htm>