[Equest-users] transplanting window placements

[Sami, Vikram]

I haven't done it with the entire geometry - just individual pieces. It should work provided you retain the same space names for thermal zone reference.

Best way to find out is to try it. Let me know how it goes.

Sent from a mobile device

 -----Original Message-----
From:   Harakhlaal [mailto:harakhlaal at gmail.com]
Sent:   Saturday, August 07, 2010 12:44 PM Central Standard Time
To:     equest-users
Subject:        [Equest-users] transplanting window placements

this will be an easy question for all the advanced users out there.

as i move my design model from iteration to iteration, instead of
getting the baseline model up to speed, has anyone had any luck with
simply saving the revised design case .inp out as the new baseline and
then replacing the geometry portion of the .inp with previous
language, i.e. 40% wwr bands of glass ... wondering if that causes
errors down the line ...

harakhlaal
energy engineer
new york
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG


This email and any files transmitted with it are confidential and intended solely for the addressee.  If you are not the named addressee you should not disseminate, distribute, copy, or alter this email.