[Equest-users] eQuest Activating the Packaged Desiccant Option

[Brian Fountain]

I could not enable the packaged desiccant curves but setting the 
"maximum humidity" value on the basics tab of the system enables the 
Desiccant Performance Curves and you can set your add on desiccant type 
to Solid Vent Air 1 and select the appropriate control 
mode/configuration to (hopefully) give you the closest system.

Good luck!

Kathryn Kerns wrote:
> Does anybody know how to activate the Packaged Desiccant option in 
> eQuest? I have created some curves that I think might work and they 
> show up as part of the possible selectable curves when I click on the 
> Packaged Desiccant Tab curves individually, but I can't get the Design 
> Wizard to select this curve or indeed, any curve from the possible 
> list that appears. What am I missing? Some other part of another tab 
> that needs to be activated? If so, where? I just assumed that this 
> option worked and if I could make curves, I could use it. Maybe it 
> doesn't work? If this is true, I am going to be peeved.
>  
> Thanks for listening.
> ------------------------------------------------------------------------
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>   
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.851 / Virus Database: 271.1.1/3077 - Release Date: 08/17/10 02:35:00
>
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100817/ad267cfa/attachment-0001.htm>