[Equest-users] SS-E or SS-R for Unmet Hours?
Nick Caton
ncaton at smithboucher.com
Mon Aug 2 14:27:07 PDT 2010
Pages 5 and 6 of that document make for great "post on the wall"
references at work.
They double as impressive light coffee table reading for one's swank
bachelor pad, to boot =)!
~Nick
NICK CATON, E.I.T.
PROJECT ENGINEER
25501 west valley parkway
olathe ks 66061
direct 913 344.0036
fax 913 345.0617
Check out our new web-site @ www.smithboucher.com
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Pasha
Korber-Gonzalez
Sent: Monday, August 02, 2010 3:21 PM
To: Jennifer Jin
Cc: equest-users at lists.onebuilding.org
Subject: Re: [Equest-users] SS-E or SS-R for Unmet Hours?
Hi Jennifer,
I suggest the SS-F report, not SS-E. Take a look at the attached
document, this should help you understand the reports better and what
information they contain. I use this reference document ALL the time to
help me analyze and QC check my models.
Let us know if you have more questions.
Pasha
On Mon, Aug 2, 2010 at 12:24 PM, Jennifer Jin <
evergreen.building at yahoo.com> wrote:
Pasha,
Thanks for your quick response. SS-E report provides the annual total
fas run hours (not a zone level), will that be sufficient for a LEED
submittal?
Thanks,
Jennifer
________________________________
From: Pasha Korber-Gonzalez <pasha.pkconsulting at gmail.com>
To: Jennifer Jin <evergreen.building at yahoo.com>
Cc: equest-users at lists.onebuilding.org
Sent: Mon, August 2, 2010 2:18:08 PM
Subject: Re: [Equest-users] SS-E or SS-R for Unmet Hours?
Jennifer,
start with looking at both SS-F (for each zone in your model) and SS-R
for each system in your model. You'll need to use them both
simultaneously to start understanding what your model is OR is not
doing.
Pasha
On Mon, Aug 2, 2010 at 12:05 PM, Jennifer Jin <
evergreen.building at yahoo.com> wrote:
Hi Every one,
I have a project which use heat pump for a two story office building.
Which report should I use to get unmet hours, SS-E or SS-R?
Many thanks,
Jennifer
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100802/2de1cf51/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100802/2de1cf51/attachment-0002.jpeg>
More information about the Equest-users
mailing list