[Equest-users] all input values

Pasha Korber-Gonzalez pasha.pkconsulting at gmail.com
Fri Aug 6 15:44:54 PDT 2010


Kaite,

try reading the BDL file.  this is the file that is created from the .inp
file so that DOE2 can read it in BDL (Building Description Language.)

Pasha

On Fri, Aug 6, 2010 at 2:43 PM, Katie Mac <kmacken2 at email.smith.edu> wrote:

> Hey everyone!
>
> I need access to all the input values for a given model, specifically for
> infiltration calculations.  I've searched through the INP file but it
> doesn't show every parameters.
>
> I'm studying the ASHRAE Enhanced infiltration method and seeing the effects
> of altering the coefficients.  You can alter these values by going through
> Detailed Mode.  Within Properties of any spc or plnm zone, select
> Infiltration and change the Infiltration Method to 'ASHRAE Enhanced'.   I
> need to be able to read these values for further calculations and later use
> in a MATLAB program.
>
> The only files I've been able to read have been the INP, SIM, and CSV
> (_EG_MoEU_ED) files.
>
> Thanks so much,
> Katie
>
>
>
> --
> Katie MacKenzie
> Smith College, Engineering 2011
> Cell: 503.730.6354
> E-mail: kmacken2 at smith.edu
> Website: www.ktmackenzie.com
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100806/611fc4f0/attachment-0002.htm>


More information about the Equest-users mailing list