[Equest-users] INDIRECT WATER HEATER

[Fish, Larry]

Hello Folks - 
 
I have a question, as the subject says, about modeling an Indirect Water
Heater. I looked through the archives and it seems that about 4 or 5
people have asked this in the past, but I didn't see any responses. Has
any found a solution for this?
 
Thank you in advance for your time and assistance.
 
Best Regards,
Larry
 
Larry Fish 

	
732-584-0262 	
www.psands.com <http://www.psands.com/>  	
PS&S 	
integrating design & engineering 	

 

This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. This
communication may contain privileged or confidential information. If you
are not the intended recipient or person responsible for delivering this
confidential communication to the intended recipient, you have received
this communication in error, and any review, use, dissemination,
forwarding, printing, copying or other distribution of this e-mail
message and any attached files is strictly prohibited. If you have
received this confidential communication in error, please notify the
sender immediately by reply e-mail message and permanently destroy all
electronic, paper or other versions of this e-mail message and
attachments thereto.
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101206/ce8c3b34/attachment.htm>