[Equest-users] eQuest Crashing when fan control changed

[Fred Betz]

All,

When I change the fan control in a VAV system from Inlet to Fan EIR FPLR and apply a curve, eQuest locks up and I have to close the program.

This only happens in one of the VAV systems I have, the other 4 work fine.

Also, I can change from Inlet to Variable Speed without any problem.

Any thoughts on what could be causing this?

Fred

Fred Betz  PhD., LEED AP
Sustainable Systems Analyst



AEI | AFFILIATED ENGINEERS, INC.
5802 Research Park Blvd. | Madison, WI  53719

P: 608.236.1175 | F: 608.238.2614
fbetz at aeieng.com<mailto:fbetz at aeieng.com>  |  www.aeieng.com<http://www.aeieng.com/>



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101228/97b2e75e/attachment.htm>