[Equest-users] User Defined Zone Names in the Wizard

[Alan Crittendon]

I have used it with success and failure.  It had to do something with how
the zone boundaries were defined.  I never did figure out why but one time
after changing the names (after multiple crashes) it simply accepted my
definitions and I never looked back.

 

Alan Crittendon, PE, LEED AP
DW Collier Engineering, Inc.

  _____  

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Jeremy
McClanathan
Sent: Wednesday, December 01, 2010 10:20 AM
To: 'Rob Hudson'; 'Eddie Corwin'
Cc: 'eQuest'
Subject: Re: [Equest-users] User Defined Zone Names in the Wizard

 

I have also used this feature with XP professional and didn't have any
problems.

Jeremy

 

From: Rob Hudson [mailto:rdh4176 at gmail.com] 
Sent: Wednesday, December 01, 2010 7:38 AM
To: Eddie Corwin
Cc: eQuest
Subject: Re: [Equest-users] User Defined Zone Names in the Wizard

 

i am using windows XP professional.  havent tried it on a newer OS yet.  my
computer isn't anything amazing either.  there was a post a while back that
someone couldn't get it to work either, maybe searching for that person and
asking them what they did might help.

good luck!

On Wed, Dec 1, 2010 at 10:35 AM, Eddie Corwin <ecorwin at altanova-energy.com>
wrote:

You have gotten it to work!  I have tried using this feature on a few
different computers, and it always causes eQuest to crash.   What operating
system are you working on?
 

 

 

 

  _____  

From: Rob Hudson <rdh4176 at gmail.com>
To: Eddie Corwin <ecorwin at altanova-energy.com>
Cc: eQuest <equest-users at lists.onebuilding.org>
Sent: Wed, December 1, 2010 10:06:25 AM
Subject: Re: [Equest-users] User Defined Zone Names in the Wizard


I have used it a few times successfully.  it is a nice feature that helps
eliminate some of the extra stuff in the names of the spaces that bother me.

On Wed, Dec 1, 2010 at 10:04 AM, Eddie Corwin <ecorwin at altanova-energy.com>
wrote:

I am not sure if this is a new feature, but I never noticed it before.  In
the wizard, underneath the zoning drop down menu there is a button titled
"Zone names and Characteristics"  In there, there is an option to change the
zone naming from "Automatic" to "User Defined".   Whenever I select User
defined, the program hangs for a few seconds, than quits unexpectedly.  Has
anyone gotten this feature to work, or know why it causes eQuest to crash on
me?

 

Attached are a few pix that show what I am taking about.

 

Thank,

 

-Eddie


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG




-- 
Rob Hudson




-- 
Rob Hudson

This email message, including any attachments, is for the sole use of the
intended recipient and may contain confidential, proprietary, and/or
privileged information, as well as content subject to copyright and other
intellectual laws.  If you are not the intended recipient, you may not
disclose, use, copy, or distribute the email message or its attachments.  If
you believe you have received this email message in error, please contact
the sender by reply email, immediately delete this email and destroy copies.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101201/ba76ab06/attachment-0001.htm>