[Equest-users] Test Error message " Value is Not Within Allowable Range"

[saleh saadi]

If this is your first time using eQuest 3.64, then reinstall the program with all default. I did this and solved the problem. 



--- On Thu, 12/23/10, McArdle, Mike <Mike.McAardle at state.vt.us> wrote:

From: McArdle, Mike <Mike.McAardle at state.vt.us>
Subject: [Equest-users] Test Error message " Value is Not Within Allowable Range"
To: "'equest-users at lists.onebuilding.org'" <equest-users at lists.onebuilding.org>
Date: Thursday, December 23, 2010, 10:53 AM

When running the setup test for 3.64 I get the Error message:   " Value is Not Within Allowable Range"  Any suggestions ?  Please feel free to call or email me should you have any questions or concerns.  Thank you,  Sincerely,  Michael J. McArdle , P.E.Buildings Engineer II, Project Manager State of Vermont, Buildings and General Services (BGS)2 Governor Aiken AvenueMontpelier, Vt. 05633  Office: 802-828-5650;  cell: 802-272-4828    
-----Inline Attachment Follows-----

_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101224/39d28365/attachment-0002.htm>