[Equest-users] ASHRAE 90.1 primary secondary loop pump power

Alper Erten Alper.Erten at BuroHappold.com
Fri Feb 5 17:38:51 PST 2010


 

Hi all,

 

First of all I would like to thank everyone in this forum for providing
very valuable information to less experienced LEED modelers energy like
myself.

 

I have a short question regarding the ASHRAE 90.1 Baseline pump power.
Currently, I am modeling a VAV system with two central plant chillers.
The cooling load is more than 300 tons therefore Appendix G says model
the baseline chilled water loop as primary - secondary with a variable
speed secondary pump. Also the pump power should be 22 W/gpm.

 

Now, I have 3 pumps in my chilled water loop (2 primary pumps and a
secondary pump). So should I set all of these pumps to have a pump power
of 22 W/gpm? It feels like cheating if I assign 22 W/gpm pump power to
the primary pumps as the head loss in primary loop would be much less
than the secondary loop in general. What do you think?

 

I really appreciate any inputs in this matter. 

 

Thanks in advance for all the responses.

 

 

Alper Erten

 

CoSA Engineer, LEED(r)AP

Buro Happold Consulting Engineers Inc.

www.burohappold.com <http://www.burohappold.com/> 

 



This message has been scanned by MailController - www.MailController.altohiway.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100206/18918ab9/attachment.htm>


More information about the Equest-users mailing list