[Equest-users] DHW

[Bouchard, Jordan]

Hi Jason,

I usually model it as a natural gas DHW. I then take the efficiency of
the steam boilers and derate the efficiency to account for the
inefficiencies of the heat exchanger and condensate losses. Not sure if
this is the best way though or if anyone else has an idea.

Jordan Bouchard, EIT, LEED AP
Mechanical Designer
Stantec
100 - 401 Wellington Street West
Toronto ON M5V 1E7
Ph: (416) 598-7605
Fx:  (416) 596-6680
Jordan.Bouchard at stantec.com
www.stantec.com

The content of this email is the confidential property of Stantec and
should not be copied, modified, retransmitted, or used for any purpose
except with Stantec's written authorization. If you are not the intended
recipient, please delete all copies and notify us immediately.

Please consider the environment before printing this email.
-----Original Message-----
From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of
Robinet, Jason
Sent: Wednesday, February 17, 2010 2:34 PM
To: 'equest-users at lists.onebuilding.org'
Subject: [Equest-users] DHW

Hello,

What is the best way to simulate domestic hot water produced with steam?

Thank you,

Jason Robinet
Ameresco

************************************************************************
********NOTE: This e-mail may contain PRIVILEGED and CONFIDENTIAL
information and is intended only for the use of the specific
individual(s) to which it is addressed. If you are not an intended
recipient of this e-mail, you are hereby notified that any unauthorized
review, use, dissemination, disclosure, distribution or copying of this
e-mail or the information contained in it or attached to it is strictly
prohibited. If you have received this e-mail in error, please
immediately notify the person named above by reply e-mail and destroy
all copies of the original message. Thank you.
************************************************************************
********
_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG