[Equest-users] Multiple Floors with Multiple Roofs?

Jason Wendel jwendel at heatheng.com
Tue Jan 5 07:09:47 PST 2010

I am modeling a building with 2-3 floors depending on where in the building you are.  Each of the floors are somewhat different so I created 3 models and stacked them on top of each other.  Once I got into the detailed mode I find that the program put a roof on each floor.  I had incorrectly assumed that if I put one floor on top of another, then the program would recognize that it's "roof" is adjacent to another floor and make it adiabatic while overhangs and extended roofs would keep their "roof label".  Do I now need to go through and delete all the roofs from the 1st and part of the 2nd floor?  Or does eQuest not take them in on the calculation because it knows that it should be adiabatic since it has a floor above it?

[cid:image003.jpg at 01CA8DDF.0E99BBE0]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100105/5d1967ab/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 42022 bytes
Desc: image003.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100105/5d1967ab/attachment-0001.jpg>

More information about the Equest-users mailing list