[Equest-users] Modified Zone

Bouchard, Jordan Jordan.Bouchard at stantec.com
Thu Jan 7 11:19:21 PST 2010


Under the Building Shell  2-D tab you can click on the "Grid" icon that
is in the toolbar available in the viewport. From there you can edit the
polygon in a way similar to what was available in the wizard. 

 

However, modifying zones is still very tricky. The reference vertex will
move if you add or delete vertexes. One also has to be careful of what
is referencing the polygon one is trying to change. If you are deleting
vertexes, all the walls/windows that reference that vertex have to be
deleted first. Finally if you delete or create an entirely new zone, the
corresponding thermal zone needs to be created/deleted or else the model
won't run. The above are the things that I can think of that someone has
to be mindful of. There are probably others that I rediscover every time
I try to do this again. Depending on the complexity of the change, it
can be quite a painful experience. 

 

Save your model under multiple backups, under different names often,
because if something goes wrong it is hard to track down exactly why,
and it is easier to start fresh again.

 

Regards,

 

Jordan Bouchard, LEED(r) AP
Mechanical Engineer In Training
Stantec Consulting Ltd.
Ph: (416) 596-6686
Fx: (416) 596-6680
Jordan.Bouchard at stantec.com 

stantec.com <http://www.stantec.com>  

 

The content of this email is the confidential property of Stantec and
should not be copied, modified, retransmitted, or used for any purpose
except with Stantec's written authorization. If you are not the intended
recipient, please delete all copies and notify us immediately.

 

* Please consider the environment before printing this email.

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of William
Lopez
Sent: Thursday, January 07, 2010 2:05 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Modified Zone

 

Hi Everybody,

I'm trying to modify the area of a polygon in the DD stage, is there a
way to change zoning without going back to wizard?

 

Thank you in advance

 

William G. Lopez CEM.

Buffalo Energy, Inc.

716-677-4899 P

716-677-4722 F

william at buffalo-energy.com

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100107/fb0ce291/attachment-0001.htm>


More information about the Equest-users mailing list