[Equest-users] (no subject)
kristy.walson at tlc-eng.com
Fri Jan 15 13:00:20 PST 2010
Can a similar method be used for heating unmet hours, as well?
Kristy Walson, PE, LEED AP
Mechanical Engineer / Sustainable Design
From: equest-users-bounces at lists.onebuilding.org [mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Susan Trzos
Sent: Friday, January 15, 2010 3:53 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] (no subject)
While I do not know the "correct" way to reduce throttling hours, one thing I typically do is to vary the temperatures under 'Cooling Control and Reset' under the Cooling then Coil Cap-Control tab of an air-side system. I've always attached a document a coworker sent me from Trane that might be of help although I have not tried these strategies yet. (See attached)
I would also greatly appreciate any input from others on how to reduce throttling hours as this is a problem I often encounter as well.
SUSAN TRZOS, LEED(r) AP
SKIDMORE, OWINGS & MERRILL LLP
224 SOUTH MICHIGAN
CHICAGO, IL 60604
T: 312.360.4234 F: 312.360.4545
SUSAN.TRZOS at SOM.COM
The information contained in this communication may be confidential, is intended only for the use of the recipient(s) named above, and may be legally privileged. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication, or any of its contents, is strictly prohibited and may be unlawful. If you have received this communication in error, please return it to the sender immediately and delete the original message and any copy of it from your computer system. If you have any questions concerning this message, please contact the sender.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Equest-users