[Equest-users] Throttling Range and Pipe Insulation

Vikram Sami VSami at lasarchitect.com
Thu Jan 21 07:05:56 PST 2010


Look at the Detailed Simulation Reports Summary PDF documents (should be
in your eQUEST install folder) - it explains the difference between the
two. 

 

Vikram Sami, LEED AP 
Direct Phone 404-253-1466 | Direct Fax 404-253-1366 

LORD, AECK & SARGENT ARCHITECTURE



 

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Walt
Henry
Sent: Thursday, January 21, 2010 8:55 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] Throttling Range and Pipe Insulation

 

Good morning eQUEST users,

 

I have two requests:

 

1)     What is the definition of "throttling range"?  I have always had
0 until my last project which is a Police Station.  We do mostly energy
retrofits and the existing boiler, 37 years old, has an input of 450
MBH.  The total HVAC load is 222.651 MBH per eQUEST.  For the first time
Report BEPU shows my base case model to be 34.1% outside of the
throttling range.  What does this mean?  The % of hours any plant load
is not satisfied is 0.

 

2)     I have a church to model, starting this morning, which has no
insulation on the steam piping and we want to determine the savings by
putting 1" of              fiberglass on the pipes.  Usually we would
determine the savings in e-plus but is there any way to model this in
eQUEST?  There are other measures and it would be convenient to have
everything in one report.

 

Walt Henry

Energy Specialist

RISE Engineering

1341 Elmwood Ave.

Cranston, RI 02910

U.S.A.

Phone:  401-784-3700 Ext. 119

Fax:      401-784-3710    

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100121/d572265d/attachment-0002.htm>


More information about the Equest-users mailing list