[Equest-users] Ventilation and Recirculated air

Bruce Easterbrook bruce5 at bellnet.ca
Fri Jul 9 05:39:46 PDT 2010


I normally only input the ASHRAE outside air values, autosize everything 
else.  This way you can check the design values.  Keep everything in 
your model simple, save lots of way points.  You will be crashing your 
model many times as you learn how it works.  This will require going 
back to your last functioning file and trying again,  make sure you have 
that file or you will go right back to the beginning.  Don't promise the 
design team results on Monday, if you are lucky it will be next Friday.  
Good luck!
Bruce Easterbrook P.Eng.
Abode Engineering

On 09/07/2010 08:08 AM, Omar Katanani wrote:
>
> Dear all,
>
> I received from the design team an excel sheet showing the supply flow 
> rates for each zone (CFM).
>
> The numbers were far greater than the ASHRAE recommended values. So I 
> assume that the ASHRAE values are for ventilation requirements (fresh 
> air only) and the excel sheet from the design team that I received is 
> the flow rate supplied to the zone (Ventilation requirements and 
> Recirculated air). Is this true?
>
> What do you usually input to eQUEST? Both values?
>
> Many thanks,
> Omar
> ___________________________
>
> Omar Katanani
> Sustainable Design Engineer
> Email: omar at ecoconsulting.net
>
>
> EcoConsulting (Lebanon)
> Nahas Building, 4th floor
> 4 St-Maron Street / Georges Haddad Avenue
> Postal Code: 2028 5806 SAIFI
> Beirut, Lebanon
> Tel:       +961 (0) 1 971 255
> Mobile:    +961 (0) 3 045 045
>
>
> EcoConsulting (UK) Ltd
> 28 Marshalsea Road
> London, SE1 1HF
> Tel: +44 (0)207 939 0989
> Fax: +44 (0)207 939 0981
> Website: www.ecoconsulting.net
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100709/361dab06/attachment-0002.htm>


More information about the Equest-users mailing list