[Equest-users] exterior lighting, non HVAC loads.

[Bruce Easterbrook]

You may need to be in the DD wizard to do this.  The project I have open 
is beyond the SD. Finish all your basic setup in the SD wizard for the 
first floor and change to DD wizard.  Use a copy and nothing is lost.  I 
will stay for hours or days at the finish button of the Project 
Navigator in the DD wizard doing incremental edits, saving each time.  
Each time you press finish your project is run, confirming equest is 
happy with your changes.  In building shell, using the action tab 
select, building creation wizard, and it will bring up the project 
navigator after a warning about losing everything you entered in 
detailed edit.  Be working with a copy and ignore the warning. Don't add 
anything after this screen and you have nothing to lose.  You can also 
go back and forth as many times as you like.  Select your Bldg Envelope 
and Loads 1, that should be all you have coming from the SD wizard. To 
add the Keith's post, you may need to go to screen 15 first, non-HVAC 
End uses to Model, select exterior lighting, select mode.  This will 
turn on screen 23, go there next, set your W/sq.m and you profile 
details.  Note screen 15 is a gateway to adding many other options and 
turning on other screens.  If you are missing screens you need to go to 
earlier pages and find the check box to open other screens you may wish 
to add information on.
Bruce Easterbrook P.Eng.
Abode Engineering

On 30/07/2010 06:29 PM, Keith Swartz wrote:
>
> Yehuda,
>
> If you are in the DD wizard, you can enter exterior lighting on Screen 
> 23 of the building shell screens. The area for the watts per square 
> foot is the interior building floor area, not any exterior surface area.
>
> If you are in the Detailed Interface, click on "Utility & Economics" 
> in the upper right. In the Component Tree list on the left side of the 
> screen, select "Electric Meters." At the top of the screen, select the 
> Display Mode to be "Electric Meter -- Direct Loads -- Exterior." Here 
> you can enter the exterior lighting loads in kW (instead of W/sf like 
> in the wizard).
>
> ________________________________
>
> Keith Swartz, P.E., LEED AP
>
>
> Energy Engineer / Senior Project Manager
> *Energy Center of Wisconsin
> *455 Science Drive, Suite 200, Madison, WI 53711
> Phone: 608.238.8276 x123
> Fax: 608.238.0523
>
> *The Buildings Team*
>
> /Design decisions through energy, economics and emissions analysis./
>
> www.ecw.org/Buildings <http://www.ecw.org/Buildings>
>
>
> *Energy Center University
> */Your gateway to sustainable design training and online education 
> programs.
> /www.ecw.org/university/ <http://www.ecw.org/university/>
>
> *From:* Yehuda Israel [mailto:Yehuda at newsource-energy.com]
> *Sent:* Friday, July 30, 2010 1:55 PM
> *To:* 'eQuest'
> *Cc:* Bobby Frank; 'Hanan Waizman'; 'Howard F. Israel'
> *Subject:* [Equest-users] (no subject)
>
> To all:
>
> I am trying to model an outdoor park lot that has outside lights.  How 
> do I add the lights to my building model?
>
> Thank you.
>
> *Yehuda Israel*, **
>
> Energy Analyst
>
> *New Source **Energy **Group, Inc.*
>
> 8 Ellington Way
>
> New Hempstead, NY 10977
>
> Main:    (845) 445-0457
>
> Fax:      (845) 354-6347
>
> www.NewSource-Energy.com <http://www.NewSource-Energy.com>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100731/7cb79090/attachment-0002.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1525 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100731/7cb79090/attachment-0002.jpeg>