[Equest-users] Window 4/5 Data and Baseline Glass

[Jonathon Pfantz]

Hello all,

 

>From what I understand, the best way to enter glazing information into
eQUEST is to use Window 4/5 data.  This is good when you have an actual
window you are modeling, but what about modeling ASHRAE baseline
glazing?  Is it better to input the U-value and SC using the simplified
method?  If so, any idea what to input for visible transmittance and
emissivity?  Does anybody have a better way to model baseline glazing?

 

Thanks, 

    Jonathon 

                  

  Mechanical Engineers + Electrical Engineers + Sustainable
<http://www.esdaz.com/> Design

 

Jonathon Pfantz, EIT, LEED AP BD+C | Project Engineer | *
<mailto:jonathon.pfantz at esdaz.com>  jonathon.pfantz at esdaz.com |
*602.954.4820  | 6602.954.6393

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100611/3b6be155/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1857 bytes
Desc: image001.jpg
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100611/3b6be155/attachment.jpeg>