[Equest-users] Space has no ZONE - one is required

[Rob Hudson]

you'll need to go to the HVAC section of the Detailed Design mode of your
project and create a new thermal zone by right clicking on an existing one
and select "create new thermal zone."  Then either assign it to an existing
system or create a new one.

On Fri, Jun 11, 2010 at 8:18 AM, Omar Katanani <omar at ecoconsulting.net>wrote:

>
>
> Dear all,
>
> I am having the error: "Space has no Zone - one is required". Can someone
> tell me:
>
>    1- What does this error mean?
>    2- How can I fix it (what should be done and from where)?
>    3- How do you "create a zone" after you have created a Space and its
> walls?
>
> Many thanks,
> Omar
>
> ___________________________
>
> Omar Katanani
> Sustainable Design Engineer
> Email: omar at ecoconsulting.net
>
>
> EcoConsulting (Lebanon)
> Chawkatly Building (Valli & Valli), 6th floor
> Charles Helou Street, Saifi District
> Beirut, Lebanon
> Mobile:    +961 3 045 045
>
>
> EcoConsulting (UK) Ltd
> 28 Marshalsea Road
> London, SE1 1HF
> Tel: +44 (0)207 939 0989
> Fax: +44 (0)207 939 0981
> Website: www.ecoconsulting.net
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Rob Hudson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100611/ae0920e8/attachment-0001.htm>