[Equest-users] eQuest Warning

[B. Fountain]

Along with the warning will be a series of numbers which are the curve
coefficients.  If (in detailed mode) you go to "spreadsheet view" and look
at the performance curves you can see the list of coefficients and can
quickly identify which curve is going out of range.

If I had to guess, I would guess it is a pump curve from a pump which is
being allowed to autosize -- probably a hot water pump.


> eQuest Users,
>
> I am modeling a large WSHP job with a separate CHW system for a large
> computer room. Everything was going good after several simulations when
> a series of warning messages appeared stating something about CURINV:
> Result out of limits for CURVE: ... (see attached). I am still in the DD
> Wizard.
>
> Can anyone assist on how to identify the culprit.
>
> Thanks
> Bob Vogt
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>