[Equest-users] Error Message: Condenser Water loop heating equipment- has no attached primary

Pasha Korber-Gonzalez pasha.pkconsulting at gmail.com
Mon Mar 8 23:05:29 PST 2010


Bassam,

please attach your .pd2 & .inp so that we can view into your file and see
the issue better.  The condenser loop for this system set up is your
geo-lake/well circulation loop-is this linked to your heat pumps?  They
should be linked to 3 circulation loops.

Pasha





On Mon, Mar 8, 2010 at 11:00 PM, Bassam Yammine <byammine at flowgroup.ca>wrote:

>  Hi, I'm modeling a heat pump system that uses Well/Lake water. When I run
> the simulation I get the follwing error message:"Condenser Water loop
> heating equipment- has no attached primary".
> The system consists mainly of a HP chiller with water cooled condenser and
> a Lake/Well loop type.
>
> Regards,
> Bassam Yammine
> Flow Consulting
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100309/21dc68bb/attachment-0001.htm>


More information about the Equest-users mailing list