[Equest-users] CAUTION: Variable Speed Drive FPLR???
Carol Gardner
cmg750 at gmail.com
Thu May 6 10:24:40 PDT 2010
Here you go Nick. This is in your 3-63 data area as DOE-2.chm. There is tons
of info there. Cautions are the least of your worries.
ERRORS Diagnostics deal with problems in the input that
must be corrected before the simulation will execute.
WARNINGS Diagnostics are concerned with input data that can
be used in the simulation but are probably erroneous (such as a temperature
input of 700 instead of 70.0).
CAUTIONS Diagnostics are much less severe than WARNINGS
messages and deal with questionable input value that do not significantly
affect the results of the simulation. This is the default level.
Regards,
Carol
On Thu, May 6, 2010 at 9:32 AM, Nick Caton <ncaton at smithboucher.com> wrote:
> On many projects, I’ve run into the following typical CAUTION in my SIM
> ATTN report:
>
>
>
>
>
>
> **CAUTION**********************************************************************
>
> In curve: Variable Speed Drive FPLR the dependent value
>
> is exceeding the limits.
>
> Value/Min/Max/First time: 1.257
> 0.100 1.000 12/31/24
>
>
>
>
>
> It’s *always* referencing this specific library VSD curve, and it *always*occurs in the last hours of the very last day of the modeled year. I’ve
> seen it so much I’m pretty certain that particular value 1.257 is always
> present too.
>
>
>
> What are the implications here to the modeled behavior? Is this caution
> something of concern? Is something off with the library curve?
>
>
>
> I’ve always assumed that if something is only off in the last hours of the
> modeled year, it shouldn’t be a big deal – but it’s bugging me that I’m
> seeing this come up again and again and I don’t know what it really means…
>
>
>
> ~Nick
>
>
>
>
>
> [image: cid:489575314 at 22072009-0ABB]**
>
> * *
>
> *NICK CATON, E.I.T.***
>
> PROJECT ENGINEER
>
> 25501 west valley parkway
>
> olathe ks 66061
>
> direct 913 344.0036
>
> fax 913 345.0617
>
> *Check out our new web-site @ *www.smithboucher.com* *
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100506/9930ed84/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1459 bytes
Desc: not available
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100506/9930ed84/attachment-0001.jpeg>
More information about the Equest-users
mailing list