[Equest-users] too many roofs

[Carol Gardner]

Not true. See screen 3 of 25 in the DD wizard. Look at the pull down menu.
You will see the option to select no exterior exposure. On same screen look
at pull down menu for floors, etc. Also look at screen 1 of 25 to specify #
of floors. You can call each floor a shell if you want to. Or you can call
your dog or cat Shell.....
Best,
Carol

On Mon, May 24, 2010 at 2:14 PM, Jackson, Alan
<ajackson at klingstubbins.com>wrote:

>  So from what I can tell if you build more than one shell geometry in the
> DD wizard you end up with more than one roof.
>
>
>
> What is the method for handling this so I ultimately end up with only one
> external roof surface. I feel like deleting the extra roof surfaces is a bad
> idea.
>
>
>
> Alan Jackson, LEED AP
> HVAC Project Engineer / BIM Team Leader
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20100524/7571d391/attachment-0001.htm>