[Equest-users] FW: Individual hot water loops on campus

[Zaburskaya, Svetlana]

Hello John,
 
Nobody except you responded to my question and have to resolve it;
actually I am getting problems when I am trying to re-assign systems and
spaces to individual loops, the system kicks me out.  Any suggestions?
 
Thank you.
 

Svetlana Zaburskaya 
Senior Engineer 
Kema Services, Inc. 
155 Grand Avenue 
Suite 500 
Oakland, CA 94612 
Tel (510) 891-0446 
Fax (510) 891-0440 
svetlana.zaburskaya at kema.com 
www.kema.com 

 

________________________________

From: Zaburskaya, Svetlana 
Sent: Wednesday, November 03, 2010 4:02 PM
To: 'John Aulbach'
Subject: RE: [Equest-users] Individual hot water loops on campus


Yes I am Russian.  Thank you John, on some point the system kicks me
out, but I have to resolve it anyway.  Then I have to assign correct air
system and thermal zones.
 

Svetlana Zaburskaya 
Senior Engineer 
Kema Services, Inc. 
155 Grand Avenue 
Suite 500 
Oakland, CA 94612 
Tel (510) 891-0446 
Fax (510) 891-0440 
svetlana.zaburskaya at kema.com 
www.kema.com 

 

________________________________

From: John Aulbach [mailto:jra_sac at yahoo.com] 
Sent: Wednesday, November 03, 2010 3:50 PM
To: Zaburskaya, Svetlana
Subject: Re: [Equest-users] Individual hot water loops on campus


Svetlana (a beautiful Russian name ??):
 
I believe if you create the circulation loops first, then create your
chillers and boilers, you can assign the equipment to individual loops.
 
Haven't tried this in awhile. I have been doing DOE-2 for 30 years.
 


John R. Aulbach, PE, CEM

Senior Energy Engineer

________________________________

Partner Energy

1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745

www.ptrenergy.com <http://www.ptrenergy.com/>  | jaulbach at ptrenergy.com
<mailto:%7C%20jaulbach at ptrenergy.com> 

 


________________________________

From: "Zaburskaya, Svetlana" <svetlana.zaburskaya at kema.com>
To: equest-users at lists.onebuilding.org
Sent: Wed, November 3, 2010 3:28:12 PM
Subject: [Equest-users] Individual hot water loops on campus


Hello,
 
I am building a campus with central chilled water plant and individual
boilers (and hot water loops) for each building.  I have a problems to
create a new boiler on each new loop, assigning boilers to specific air
systems and thermal zones, the program does not allow me to do this.
Any suggestions?  
 
Thank you,
 

Svetlana Zaburskaya 
Senior Engineer 
Kema Services, Inc. 
155 Grand Avenue 
Suite 500 
Oakland, CA 94612 
Tel (510) 891-0446 
Fax (510) 891-0440 
svetlana.zaburskaya at kema.com 
www.kema.com <http://www.kema.com/>  


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101104/40b6a3a0/attachment.htm>