[Equest-users] Two systems in one thermal zone?

[Carol Gardner]

That should be okay. Were you able to turn the heat off? If you can't, go to
the screen where you specify the capacity of the heating coil and input
something like .0000001.

Best,

Carol

2010/11/10 Самолётов Михаил <samoletov.mikhail at bt-comfort.ru>

>  Yes, I have CV system. But PSZ working only with DX coil. And I use fan
> coils with chilled water coils.
>
>
>
> Sincerely yours,
>
> Mikhail Samoletov
>
> Chief engineer of
>
> *"Numerical Simulation Department"*
>
> *TECHNIQUE BUREAU*
>
> Cvetochnaya str, 25"Zh", 196084 St.Petersburg, Russia
>
> www.bt-comfort.ru
>
> phone/fax +7 (812) 318-50-30
>
> mob. +7 (931) 244-83-77
>
>
>
> *From:* Carol Gardner [mailto:cmg750 at gmail.com]
> *Sent:* Saturday, November 06, 2010 8:14 PM
> *To:* Самолётов Михаил
> *Cc:* equest-users at lists.onebuilding.org
> *Subject:* Re: [Equest-users] Two systems in one thermal zone?
>
>
>
> Do you want the air supplied at a constant volume or variable volume? If CV
> then use PSZ, if VAV then use VAVS or PVAV. To get rid of your heating coil
> you can either un-select it or make it really, really small. Enter your
> electric resistance heating as a supplemental or baseboard heat source.
>
> Carol
>
> 2010/11/5 Самолётов Михаил <samoletov.mikhail at bt-comfort.ru>
>
> Hi, all!
>
>  I want to modeling OA system with electric resistance heating   and fan
> coils without heating and without outside air (on chilled water). Look
> forward any suggestions...
>
>
>
> Sincerely yours,
>
> Mikhail Samoletov
>
> Chief engineer of
>
> *"Numerical Simulation Department"*
>
> *TECHNIQUE BUREAU*
>
> Cvetochnaya str, 25"Zh", 196084 St.Petersburg, Russia
>
> www.bt-comfort.ru
>
> phone/fax +7 (812) 318-50-30
>
> mob. +7 (931) 244-83-77
>
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
>
>
> --
> Carol Gardner PE
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>


-- 
Carol Gardner PE
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101110/6582ba4d/attachment-0002.htm>