[Equest-users] Simulation Error

[John Aulbach]

Katie:

It sounds like you did not close the previous .CSV file from your previous run 
in eQuest. Close this file, and the error message should go away. I have had 
this problem before.

John Aulbach




________________________________
From: Katie MacKenzie <kmacken2 at email.smith.edu>
To: equest-users at lists.onebuilding.org
Sent: Sun, November 28, 2010 9:13:15 PM
Subject: [Equest-users] Simulation Error

Hello,

I have been using the Energy Efficiency Measure Wizard to perform simple 
sensitivity analyses and I'm getting the following error message for each 
simulation with an alternative parameter value.

Unable to open output EG_MoED_ED CSV file

Does anyone know what this means?

Thanks,
Katie


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101128/2225bb19/attachment-0002.htm>