[Equest-users] sloped roof in equest

[John Aulbach]

Which is why you keep a Wizard copy of your file. When I convert to the Detailed 
Edit mode, I save as FILENAME-DETAIL. Then if I need to go back, I have my 
original Wizard file.



John R. Aulbach, PE, CEM
Senior Energy Engineer

________________________________

PartnerEnergy
1990 E. Grand Avenue, El Segundo, CA 90245
W: 888-826-1216, X254| D: 310-765-7295 | F: 310-817-2745
www.ptrenergy.com| jaulbach at ptrenergy.com



________________________________
From: "Wolfe, Brian" <bwolfe at hksinc.com>
To: deepika khowal <deepika.khowal at gmail.com>; 
"equest-users at lists.onebuilding.org" <equest-users at lists.onebuilding.org>
Sent: Tue, October 12, 2010 1:37:35 PM
Subject: Re: [Equest-users] sloped roof in equest


Equest won’t allow you to create in the wizard then, switch out of the wizard to 
make changes then, back again with the changes made.  Once you switch out of the 
wizard, you stuck.
 
BRIAN J. WOLFE, CDT, LEED AP BD+ C
SUSTAINABLE DESIGN COORDINATOR
HKS, INC.
1919 McKINNEY AVENUE
214.969.5599 ext.3669
bwolfe at hksinc.com
www.hksinc.com
If you are sending file(s) always use my Thru DROPBOX
 
From:equest-users-bounces at lists.onebuilding.org 
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of deepika khowal
Sent: Tuesday, October 12, 2010 3:16 PM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] sloped roof in equest
 
Hi All
 
I am trying to model a sunroom which has sloped roof.
I made the model in SD wizard but when am changing the vertices in the design 
data model mode to change the roof to sloped,  am not able to save the changes 
if I open the wizard again.
Also if I create a new polygon (triangle shaped to complete the sloped roof), am 
not able to see that in my model.
if anyone have any inputs, it will be highly appreciated.
 
Thanks
Regards
Deepika
 
DALLAS, TX 75201


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101012/4373e032/attachment-0001.htm>