[Equest-users] VRV

[Gary.Schrader at buildings.schneider-electric.com]

Rob,

 

Yes. The performance curves for water-cooled equipment will be based
upon a water-cooled machine, so it is necessary to do so.

 

Thanks,

Gary


________________________________________________________________________
_______________________________________________

Gary Schrader | Schneider Electric | Buildings Business | Energy
Solutions | Engineer I
Phone: +1 913 217 8068 | Fax: +1 913 469 0206
Email: gary.schrader at buildings.schneider-electric.com | Site:
www.schneider-electric.com/buildings | Address: 16011 College Boulevard,
Suite 212, Lenexa, KS 66219, USA

*** Please consider the environment before printing this email.

________________________________

From: equest-users-bounces at lists.onebuilding.org
[mailto:equest-users-bounces at lists.onebuilding.org] On Behalf Of Rob
Hudson
Sent: Thursday, October 28, 2010 9:58 AM
To: equest-users at lists.onebuilding.org
Subject: [Equest-users] VRV

 

I understand that when modeling a typical VRV system, to use air cooled
condenser with all the manufacturers information and curves.  now, does
this still apply for the system when is is water cooled VRV? should i
change the condenser to water cooled and create a loop for this?

-- 
Rob Hudson


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101028/8d833540/attachment-0001.htm>