[Equest-users] ashrae 90.1 minnimum

[Pasha Korber-Gonzalez]

Hi Bart,

You heard somewhat correctly.  The current 90.1 baseline available in eQuest
3.64 is based on 2007 version.  Unfortunately right now there are some bugs
in the programming of the compliance tool and this tool doesn't yet run
smoothly.

Your best bet at this day and time is to use the old manual approach of
creating your baseline and manually inputting your own baseline values.

pkg

On Thu, Oct 28, 2010 at 8:35 AM, Bart Kline <bkline at ksarchitects.com> wrote:

>  Hello,
>
>
>
> I am trying to test my base design against Ashrae 90.1 2004. I heard
> through the grape vine that I could automatically set the minimum ashrae
> standards by choosing ashrae as a compliance. Opposed to entering all the
> building information from ashrae 90.1 2004. Does anyone have any experience
> with applying the ASHRAE standards to the model?
>
>
>
> Thanks
>
> Bart Kline
>
>
>
> Kline Swinney Associates
>
> 22 Middleton st
>
> Nashville TN 37210
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101028/bd5d2591/attachment-0001.htm>