[Equest-users] LEED Compliance Model generation

[Pasha Korber-Gonzalez]

Yes, James you are correct the baseline rotations are set up in the
parametric tool of the baseline file that is generated.

pkg

On Fri, Oct 8, 2010 at 1:53 PM, James Geers <jgeers at sfa-architects.com>wrote:

>  I think it does the four rotations as parametric runs in the baseline
> model.
>
>
>
> *JAMES F. GEERS  |  **ARCHITECT & LEED AP*
>
> 513.721.0600 (x107) - DIRECT
>
>
>
> *SFA ARCHITECTS, INC.*
>
> * *
>
> *CINCINNATI***
>
> 300 WEST FOURTH STREET  |  CINCINNATI, OHIO 45202  |  513.721.0600 -
> OFFICE  |  513.721.0611 - FAX
>
>
>
> *DAYTON***
>
> 120 WEST SECOND STREET  |  SUITE 1800  |  DAYTON, OHIO 45402  |
> 937.281.0600 - OFFICE  |  937.281.0611 - FAX
>
>
>
> *WWW.SFA-ARCHITECTS.COM*
>
>
>
> _______________________________________________
> Equest-users mailing list
> http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
> To unsubscribe from this mailing list send  a blank message to
> EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101008/20f66292/attachment-0002.htm>