[Equest-users] LEED Compliance Error

[Anthony Hardman]

Kudos to Mr. Geers.

 

You have to change all your unconditioned zones to conditioned, run the
compliance tool and then change the zones back after the base model has been
generated.  

 

Anthony Hardman, PE

The Green Engineer, LLP

 

From: Pasha Korber-Gonzalez [mailto:pasha.pkconsulting at gmail.com] 
Sent: Friday, October 08, 2010 2:45 PM
To: Anthony Hardman
Cc: eQUEST Forum
Subject: Re: [Equest-users] LEED Compliance Error

 

Hi Anthony,

 

attach your .pd2 & .inp file to an email and some of us can look at it and
see if we have any ideas...

 

Pasha

On Fri, Oct 8, 2010 at 12:22 PM, Anthony Hardman <Anthony at greenengineer.com>
wrote:

Bldg Sim's,

 

Any more troubleshooting tips with regards to the following LEED Compliance
error, "assign zone to baseline floor system."  I still can't get the
compliance tool to generate a baseline for me.

 

I don't have any plenums, I started this model in v3.64 and I've exceeded my
time and patience for this project at the moment.  

 

Is there an error code manual (not the tutorial) that states what these
cryptic messages are actually referring to?  I missed that memo.

 

Anthony Hardman, PE

LEED AP BD&C

Building Performance Analyst

The Green Engineer, LLP

Sustainable Design Consulting

50 Beharrell St

Concord, MA 01742

O: 978/610-2801

C: 720/840-7862

 


_______________________________________________
Equest-users mailing list
http://lists.onebuilding.org/listinfo.cgi/equest-users-onebuilding.org
To unsubscribe from this mailing list send  a blank message to
EQUEST-USERS-UNSUBSCRIBE at ONEBUILDING.ORG

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.onebuilding.org/pipermail/equest-users-onebuilding.org/attachments/20101008/81901548/attachment-0002.htm>